II
Calendar No. 187
113th CONGRESS
1st Session
S. 1072
[Report No. 113–108]
IN THE SENATE OF THE UNITED STATES
May 23, 2013
Ms. Klobuchar (for herself, Ms. Murkowski, Mr. Moran, Mr. Roberts, Mr. Johanns, Mr. Begich, Mr. Risch, Mr. Udall of New Mexico, Mr. Tester, Mr. Inhofe, Ms. Heitkamp, Ms. Ayotte, Mr. Boozman, Mr. Franken, Mr. Pryor, and Mr. Nelson) introduced the following bill; which was read twice and referred to the Committee on Commerce, Science, and Transportation
September 17, 2013
Reported by Mr. Rockefeller, with an amendment
Strike out all after the enacting clause and insert the part printed in italic
A BILL
To ensure that the Federal Aviation Administration advances the safety of small airplanes and the continued development of the general aviation industry, and for other purposes.
Short title
This Act may be cited as the
Small Airplane Revitalization Act of
2013
.
Findings
Congress makes the following findings:
A healthy small aircraft industry is integral to economic growth and to maintaining an effective transportation infrastructure for communities and countries around the world.
Small airplanes comprise nearly 90 percent of general aviation aircraft certified by the Federal Aviation Administration.
General aviation provides for the cultivation of a workforce of engineers, manufacturing and maintenance professionals, and pilots who secure the economic success and defense of the United States.
General aviation contributes to well-paying jobs in the manufacturing and technology sectors in the United States and products produced by those sectors are exported in great numbers.
Technology developed and proven in general aviation aids in the success and safety of all sectors of aviation and scientific competence.
The average small airplane in the United States is now 40 years old and the regulatory barriers to bringing new designs to the market are resulting in a lack of innovation and investment in small airplane design.
Since 2003, the United States lost 10,000 active private pilots per year on average, partially due to a lack of cost-effective, new small airplanes.
General aviation safety can be improved by modernizing and revamping the regulations relating to small airplanes to clear the path for technology adoption and cost-effective means to retrofit the existing fleet with new safety technologies.
Safety and regulatory improvements for general aviation
In general
Not later than December 15, 2015, the Administrator of the Federal Aviation Administration shall issue a final rule—
to advance the safety and continued development of small airplanes by reorganizing the certification requirements for such airplanes under part 23 to streamline the approval of safety advancements; and
that meets the objectives described in subsection (b).
Objectives described
The objectives described in this subsection are the following objectives of the Part 23 Reorganization Aviation Rulemaking Committee:
The establishment of a regulatory regime for small airplanes that will improve safety and decrease certification costs.
The establishment of broad, outcome-driven safety objectives that will spur innovation and technology adoption.
The replacement of current, prescriptive requirements under part 23 with performance-based regulations.
The use of consensus standards accepted by the Federal Aviation Administration to clarify how the safety objectives of part 23 may be met using specific designs and technologies.
Consensus-Based standards
In prescribing regulations under this section, the Administrator shall use consensus standards, as described in section 12(d) of the National Technology Transfer and Advancement Act of 1996 (15 U.S.C. 272 note), to the extent practicable while continuing to evaluate traditional methods for meeting the objectives of part 23.
Safety cooperation
The Administrator shall lead the effort to improve general aviation safety by working with leading aviation regulators to assist them in adopting a complementary regulatory approach for small airplanes.
Definitions
In this section:
Consensus standards
In general
The term consensus standards means standards developed by an organization described in subparagraph (B) that may include provisions requiring that owners of relevant intellectual property have agreed to make that intellectual property available on a nondiscriminatory, royalty-free, or reasonable royalty basis to all interested persons.
Organizations described
An organization described in this subparagraph is a domestic or international organization that—
plans, develops, establishes, or coordinates, through a process based on consensus and using agreed-upon procedures, voluntary standards; and
operates in a transparent manner, considers a balanced set of interests with respect to such standards, and provides for due process and an appeals process with respect to such standards.
General aviation
The term general aviation means all aviation activities other than scheduled commercial air carrier operations and military aviation.
Part 23
The term part 23 means part 23 of title 14, Code of Federal Regulations.
Part 23 Reorganization Aviation Rulemaking Committee
The term Part 23 Reorganization Aviation Rulemaking Committee means the aviation rulemaking committee established by the Federal Aviation Administration in August 2011 to consider the reorganization of the regulations under part 23.
Small airplane
The term small airplane means an airplane to which part 23 applies.
Short title
This Act may be cited as the
Small Airplane Revitalization Act of
2013
.
Findings
Congress makes the following findings:
A healthy small aircraft industry is integral to economic growth and to maintaining an effective transportation infrastructure for communities and countries around the world.
Small airplanes comprise nearly 90 percent of general aviation aircraft certified by the Federal Aviation Administration.
General aviation provides for the cultivation of a workforce of engineers, manufacturing and maintenance professionals, and pilots who secure the economic success and defense of the United States.
General aviation contributes to well-paying jobs in the manufacturing and technology sectors in the United States and products produced by those sectors are exported in great numbers.
Technology developed and proven in general aviation aids in the success and safety of all sectors of aviation and scientific competence.
The average small airplane in the United States is now 40 years old and the regulatory barriers to bringing new designs to the market are resulting in a lack of innovation and investment in small airplane design.
Since 2003, the United States lost 10,000 active private pilots per year on average, partially due to a lack of cost-effective, new small airplanes.
General aviation safety can be improved by modernizing and revamping the regulations relating to small airplanes to clear the path for technology adoption and cost-effective means to retrofit the existing fleet with new safety technologies.
Safety and regulatory improvements for general aviation
In general
Not later than December 15, 2015, the Administrator of the Federal Aviation Administration shall issue a final rule—
to advance the safety and continued development of small airplanes by reorganizing the certification requirements for such airplanes under part 23 to streamline the approval of safety advancements; and
that meets the objectives described in subsection (b).
Objectives described
The objectives described in this subsection are based on the recommendations of the Part 23 Reorganization Aviation Rulemaking Committee:
The establishment of a regulatory regime for small airplanes that will improve safety and reduce the regulatory cost burden for the Federal Aviation Administration and the aviation industry.
The establishment of broad, outcome-driven safety objectives that will spur innovation and technology adoption.
The replacement of current, prescriptive requirements under part 23 with performance-based regulations.
The use of consensus standards accepted by the Federal Aviation Administration to clarify how the safety objectives of part 23 may be met using specific designs and technologies.
Consensus-Based standards
In prescribing regulations under this section, the Administrator shall use consensus standards, as described in section 12(d) of the National Technology Transfer and Advancement Act of 1996 (15 U.S.C. 272 note), to the extent practicable while continuing traditional methods for meeting part 23.
Safety cooperation
The Administrator shall lead the effort to improve general aviation safety by working with leading aviation regulators to assist them in adopting a complementary regulatory approach for small airplanes.
Definitions
In this section:
Consensus standards
In general
The term consensus standards means standards developed by an organization described in subparagraph (B) that may include provisions requiring that owners of relevant intellectual property have agreed to make that intellectual property available on a nondiscriminatory, royalty-free, or reasonable royalty basis to all interested persons.
Organizations described
An organization described in this subparagraph is a domestic or international organization that—
plans, develops, establishes, or coordinates, through a process based on consensus and using agreed-upon procedures, voluntary standards; and
operates in a transparent manner, considers a balanced set of interests with respect to such standards, and provides for due process and an appeals process with respect to such standards.
Part 23
The term part 23 means part 23 of title 14, Code of Federal Regulations.
Part 23 Reorganization Aviation Rulemaking Committee
The term Part 23 Reorganization Aviation Rulemaking Committee means the aviation rulemaking committee established by the Federal Aviation Administration in August 2011 to consider the reorganization of the regulations under part 23.
Small airplane
The term small airplane means an airplane which is certified to part 23 standards.
September 17, 2013
Reported with an amendment
